Determination of three-dimensional solubility parameters of chlorinated polypropylene by ultrasonic degradation

The degradation reactions of chlorinated polypropylene (CPP) in toluene under ultrasonic irradiation were studied. The Mark–Houwink equation acquired from fractional precipitations was also suitable for estimating the molecular weight of degraded CPP. An objective standard was proposed for judging the solution behaviour of CPP in solvents by the study on the relative solubility of CPP before and after degradation. Then Hansen three-dimensional solubility parameters and the total parameter of CPP were obtained by optimization calculation in terms of the criterion proposed here. It was proved that the total parameter of CPP is creditable by the turbidity method. Compared to other standards, the result obtained from the proposed standard accorded well with the standard of complete miscibility suggested by Flory–Huggins for polymers and solvents as well as the objective reality. This standard may provide a reference for other polymers.     

Determination of Pd,Rh, Pt,Au in road dust by electrothermal vaporization inductively coupled plasma mass spectrometry with slurry sampling

Inductively coupled plasma mass spectrometry coupled with ultrasonic slurry sampling electrothermal vaporization (USS-ETV-ICP-MS) has been applied to determine Pd, Rh, Pt and Au in 0.5% m/v slurries of several road dust samples. 2% m/v ammonium pyrrolidine dithiocarbamate (APDC) was used as the modifier to enhance the ion count. The influence of instrument operating conditions, slurry preparation and interferences on the ion count was reported. This method has been applied to the determination of Pd, Rh, Pt and Au in BCR 723 Road Dust and NIST SRM 2709 San Joaquin Soil reference materials and two road dust samples collected locally. The analysis results of the standard reference materials agreed with the certified values. Precision between sample replicates was better than 10% for all the determinations. The method detection limits estimated from standard addition curves were 0.9, 0.4, 0.6 and 0.4 ng g⁻¹ for Pd, Rh, Pt and Au, respectively, in original dust samples.     

Broadband dielectric characterization of piezoelectric poly(vinylidene fluoride)thin films between 278 K and 308 K

This work describes the dielectric properties of piezoelectric poly(vinylidene fluoride) (PVDF) thin films in the frequency and temperature ranges relevant for usual applications. We measured the isothermal dielectric relaxation spectra of commercial piezoelectric PVDF thin films between 10 Hz to 10 MHz, at several temperatures from 278 K to 308 K. Measurements were made for samples in mechanically free and clamped conditions, in the direction of the poling field (perpendicular to the film). We found that the imaginary part of the dielectric relaxation spectra of free and clamped PVDF samples is dominated by a peak, above 100 kHz, that can be characterized by a Havriliak-Negami function. The characteristic time follows an Arrhenius dependence on temperature. Moreover, the spectra of the free PVDF samples show two additional peaks at low frequencies which are associated with mechanical relaxation processes. Our results are important for the characterization of piezoelectric PVDF, particularly after the stretching and poling processes in thin films, and for the design and characterization of a broad range of ultrasonic transducers.     

Computational gibberellin‐binding channel discovery unraveling the unexpected perception mechanism of hormone signal by gibberellin receptor

Gibberellins (GAs) are phytohormones essential for many developmental processes in plants. In this work, fundamental mechanism of hormone perception by receptor GID1 has been studied by performing computational simulations, revealing a new GA‐binding channel of GID1 and a novel hormone perception mechanism involving only one conformational state of GID1. The novel hormone perception mechanism demonstrated here is remarkably different from the previously proposed/speculated mechanism [Murase et al., Nature 2008 , 456, 459] involving two conformational states (“OPEN” and “CLOSED”) of GID1. According to the new perception mechanism, GA acts as a “conformational stabilizer,” rather than the previously speculated “allosteric inducer,” to induce the recognition of protein DELLA by GID1. The novel mechanistic insights obtained in this study provide a new starting point for further studies on the detailed molecular mechanisms of GID1 interacting with DELLA and various hormones and for mechanism‐based rational design of novel, potent growth regulators that target crops and ornamental plants. © 2013 Wiley Periodicals, Inc.     

Effects of Cd2+ substitution on elastic properties and step-like anomalies in Tl0.9Bi0.1Sr1.8Yb0.2Ca1−xCdxCu1.99Fe0.01o7−δ superconductors

Cd-doped Tl_0.9Bi_0.1Sr_1.8Yb_0.2Ca_1−xCd_xCu_1.99Fe_0.01O_7−δ (x=0–0.4) bulk superconductor samples were prepared by solid-state reaction method, to examine the effect of Cd on ultrasonic velocity and elastic behavior of the samples. The samples were characterized by X-ray diffraction, DC electrical resistivity and temperature dependent ultrasonic velocity measurements. DC electrical resistivity measurement showed all the samples exhibit metallic normal-state behavior with the highest T_{c zero} observed at around 76.4 K (x=0.3). Ultrasonic velocity measurements at 80 K showed a non-linear increase in both absolute longitudinal and shear velocities as well as elastic moduli with Cd substitution with the largest increase observed for the x=0.3 sample. Temperature dependant longitudinal modulus showed elastic anomaly characterized by a step-like slope change at around 230 K for x=0 & x=0.3 and at around 250 K for x=0.4 with the x=0.3 sample showing the sharpest slope change. A comparison between experimental data and calculated lattice anharmonicity curve based on the model proposed by Lakkad, showed large deviation of the experimental longitudinal modulus curves for (x=0.3) from the calculated anharmonicity curves indicating that the elastic behavior was strongly influenced by the existence of the step-like longitudinal anomaly. On the other hand, our analysis using the Landau free energy model found that the anomalous step-like elastic behavior fitted well with the equation derived from the model for regions below and above the elastic anomaly temperature, T_A. The fitting indicated that the anomaly is related to a phase transition that is suggested to involve ordering of oxygen which introduces strain in the system.     

基于ARM的嵌入式超声传播时间测量装置

应用超声波检测技术进行检测时,通常需对超声波在介质中的传播时间进行精准的测量,为精准测量超声波的传播时间,设计了一套基于ARM的嵌入式超声传播时间测量装置。该装置电路运行稳定,成本低廉,采用多次测量结果取算数平均值的方法以减小随机干扰,采用参比方法放置接收探头以消减电路中电子器件的延时。通过对实验结果进行分析,得出该装置可精准测量超声波在实验试块中的传播时间且满足设计要求,分辨率可达一纳秒。     

基于超声波和云测试的油井液面测试系统研究

针对目前油井液面深度测试系统测量范围小、误差大、稳定性低的缺点,提出了基于声波法测动液面原理,利用时间序列分析技术、新息自适应卡尔曼滤波技术来实时检测回波信号,进而实现对油井液面深度的高精度测量和噪声处理;选用FPGA和云测试技术成功实现了油井液面深度测量系统的远程化和网络化。基于云测试的油井液面远程监测系统目前已在油田生产现场通过测试,测试结果表明,系统稳定,算法实时、高效,动液面深度测量误差小,测量精度高,能满足实际工程应用。     

Long distance laser ultrasonic propagation imaging system for damage visualization

Wind turbine blade failure is the most prominent and common type of damage occurring in operating wind turbine systems. Conventional nondestructive testing systems are not available for in situ wind turbine blades. We propose a portable long distance ultrasonic propagation imaging (LUPI) system that uses a laser beam targeting and scanning system to excite, from a long distance, acoustic emission sensors installed in the blade. An examination of the beam collimation effect using geometric parameters of a commercial 2 MW wind turbine provided Lamb wave amplitude increases of 41.5 and 23.1 dB at a distance of 40 m for symmetrical and asymmetrical modes, respectively, in a 2 mm-thick stainless steel plate. With this improvement in signal-to-noise ratio, a feasibility study of damage detection was conducted with a 5 mm-thick composite leading edge specimen. To develop a reliable damage evaluation system, the excitation/sensing technology and the associated damage visualization algorithm are equally important. Hence, our results provide a new platform based on anomalous wave propagation imaging (AWPI) methods with adjacent wave subtraction, reference wave subtraction, reference image subtraction, and the variable time window amplitude mapping method. The advantages and disadvantages of AWPI algorithms are reported in terms of reference data requirements, signal-to-noise ratios, and damage evaluation accuracy. The compactness and portability of the proposed UPI system are also important for in-field applications at wind farms.     

船用超声液位传感器的分析与设计

介绍了一种船用某型超声液位传感器的基本结构和工作原理。在对脉冲式超声探头的轴向声压分布特点及其声透射强度分析研究的基础上,给出了该传感器的超声信号发射端与接收端之间距离d和压电晶片保护膜的壁厚δ值的确定方法。最后设计了一套超声液位传感器性能测试实验平台,对上述理论研究结论进行了实验验证。     

正交设计-紫外分光光度法测定青蒿中的青蒿素

以干青蒿叶为原料,考察石油醚萃取青蒿素的工艺条件,如温度、时间、溶剂量及超声功率等因素,正交法确定了最佳萃取工艺条件为温度40℃,超声功率90W,时间20min（两次）,液固比120∶1（mL.g-1）。紫外分光光度法直接测定不同产地青蒿中青蒿素的含量,结果表明：用超声波强化石油醚萃取青蒿素与常规浸泡法石油醚萃取比较,用超声波可以大大缩短萃取时间,提高了萃取率。